Home › Engine / Hybrid System › 1TR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3250E _51 Engine / Hybrid System _040046 1TR-FE ENGINE MECHANICAL _0185045 ENGINE UNIT DE DETAILS F

1TR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

This engine uses valve rocker arms with built-in needle bearings. This reduces the friction that occurs between the cams and the roller rocker arms when the valves are pushed down, thus improving fuel economy.


b.

A valve lash adjuster, which maintains a constant zero valve clearance through the use of oil pressure and spring force, is used.


c.

The intake and exhaust camshafts are driven by the crankshaft via the timing chain.


d.

A valve spring, whose upper portion is shaped like a beehive, is used to reduce inertial mass. As a result, the load on the valve spring and friction are reduced.


e.

The diameter of the valve spring retainer has been decreased to reduce inertial mass and friction.


f.

The Dual Variable Valve Timing-intelligent (Dual VVT-i) system is used to achieve low fuel consumption and higher engine performance, reducing exhaust emissions.


g.

This engine uses the Dual VVT-i system which controls the intake camshaft and exhaust camshaft to provide optimal valve timing in accordance with driving conditions. As a result, lower fuel consumption, higher engine performance and fewer exhaust emissions have been achieved.

W126299C01
1.135,1.479 1.302,1.104 true 0.823,1.417 0.75,1.094 true 0.667,1.667 0.385,1.552 true 0.99,2.125 0.469,2.156 true 0.76,2.406 0.51,2.479 true 0.792,3.885 0.542,3.958 true 1.063,3.938 0.583,4.323 true 1.052,4.188 0.938,4.542 true 1.958,2.385 1.563,2.771 true 3.698,0.885 3.448,1.021 true 4.208,1.344 3.906,1.344 true 6.156,1.094 6.01,0.896 true 6.073,1.479 5.792,1.26 true 6.135,1.708 5.667,1.573 5.667,1.573 6,1.76 true 5.938,1.958 5.604,1.906 true 6.521,2.042 6.646,2.24 true 5.792,2.875 5.51,2.885 true 5.719,3.229 5.417,3.26 true 5.604,3.542 5.365,3.625 true 5.292,5.01 5.052,5.094 true 0.646,0.906 0.958,1.063 0.313,0.156 10 false *1 0.229,1.427 0.542,1.583 0.313,0.156 10 false *2 0.292,2.042 0.531,2.229 0.24,0.188 10 false *3 0.333,2.385 0.646,2.542 0.313,0.156 10 false *4 0.354,3.865 0.667,4.021 0.313,0.156 10 false *5 0.417,4.24 0.729,4.396 0.313,0.156 10 false *6 0.813,4.542 1.125,4.698 0.313,0.156 10 false *7 1.969,2.198 2.281,2.354 0.313,0.156 10 false *8 4.26,1.229 4.573,1.385 0.313,0.156 10 false *9 3.75,0.719 4.219,0.875 0.469,0.156 10 false *10 1.26,0.906 1.729,1.063 0.469,0.156 10 false *11 5.802,0.698 6.271,0.854 0.469,0.156 10 false *12 5.563,1.083 6.031,1.24 0.469,0.156 10 false *13 5.417,1.417 5.885,1.573 0.469,0.156 10 false *14 5.354,1.76 5.823,1.917 0.469,0.156 10 false *15 5.25,2.76 5.719,2.917 0.469,0.156 10 false *16 5.188,3.135 5.656,3.292 0.469,0.156 10 false *17 5.115,3.521 5.583,3.677 0.469,0.156 10 false *18 6.635,2.24 7.104,2.396 0.469,0.156 10 false *20 4.792,5 5.26,5.156 0.469,0.156 10 false *19
*1 Chain Sub-assembly *2 Exhaust VVT-i Controller (Camshaft Timing Exhaust Gear Assembly)
*3 Intake VVT-i Controller (Camshaft Timing Gear Assembly) *4 No. 1 Chain Tensioner Assembly
*5 Chain Tensioner Slipper *6 Crankshaft Timing Gear
*7 Crankshaft *8 No. 1 Chain Vibration Damper
*9 Intake Camshaft (Camshaft) *10 Exhaust Camshaft (No. 2 Camshaft)
*11 Timing Chain Guide *12 No. 1 Valve Rocker Arm Sub-assembly
*13 Valve Stem Cap *14 Valve Spring Retainer Lock
*15 Valve Spring Retainer *16 Inner Compression Spring
*17 Valve Stem Oil Seal *18 Valve Spring Seat
*19 Valve *20 Valve Lash Adjuster Assembly


Valve Timing
W126277E01
3.74,1 3.969,0.531 3.969,0.531 4.135,0.531 true 3.875,2.76 4.135,3.125 4.135,3.125 4.302,3.125 true 1.979,2.875 2.146,2.875 2.146,2.875 2.406,2.615 true 2.75,0.365 2.917,0.365 2.917,0.365 3.063,0.781 true 0.906,0.281 2.771,0.594 1.865,0.313 10 false Intake VVT-i Operation Range 0.125,2.781 1.99,3.094 1.865,0.313 10 false Intake VVT-i Operation Range 4.344,3.042 6.354,3.365 2.01,0.323 10 false Exhaust VVT-i Operation Range 5.021,1.354 6.885,1.667 1.865,0.313 10 false : Intake valve opening angle 5.031,1.708 6.896,2.021 1.865,0.313 10 false : Exhaust valve opening angle 3.188,0.51 3.552,0.792 0.365,0.281 10 false 1° 3.198,3.427 3.552,3.708 0.354,0.281 10 false BDC 4.167,0.458 6.177,0.781 2.01,0.323 10 false Exhaust VVT-i Operation Range 3.208,0.24 3.573,0.521 0.365,0.281 10 false TDC 3.5,0.51 3.865,0.792 0.365,0.281 10 false 8° 4.219,0.875 4.583,1.156 0.365,0.281 10 false 44° 2.573,0.677 2.938,0.958 0.365,0.281 10 false 30° 2.51,2.99 2.875,3.271 0.365,0.281 10 false 34° 3.479,3.167 3.844,3.448 0.365,0.281 10 false 8° 4.365,2.625 4.729,2.906 0.365,0.281 10 false 53° 1.927,2.208 2.292,2.49 0.365,0.281 10 false 72°