Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE
NM3250E _59 Vehicle Exterior _042516 EXTERIOR PANELS / TRIM _0197880 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  AERODYNAMICS  


CONSTRUCTION


a.

Aerodynamic Parts

i.

Aerodynamic parts are provided on various parts of the vehicle and the Cd level* is reduced to achieve improved fuel efficiency.

HINT:

*: The Cd level refers to the air resistance coefficient. Cd stands for Constant drag. The lower the level is, the lesser the air resistance is. This improves fuel efficiency.


·

A front wheel opening extension pad No. 1 (*1 in illustration) and rear wheel opening extension pad No. 1 (*2 in illustration) are provided to restrain the air volume that contacts the rotating tire. As a result, disturbances due to air turbulence from the rotation of the front tire interfering with the air flow around it are suppressed and the air flow is adjusted to ensure a higher dimension of straightline stability when driving at high speeds while reducing air resistance.

Spats (The illustration shows an example)
V113707C01
0.406,3 0.552,3 0.552,3 0.823,2.583 true 5.083,1.396 5.229,1.396 5.229,1.396 5.5,0.979 true 5.344,2.938 5.49,2.938 5.49,2.938 5.76,2.521 true 4.219,2.75 4.083,2.75 4.083,2.75 3.906,2.302 true 2.698,3.323 2.563,3.323 2.563,3.323 2.302,2.781 true 0.25,2.917 0.563,3.073 0.313,0.156 10 false *1 5.198,2.854 5.51,3.01 0.313,0.156 10 false *2 4.927,1.313 5.24,1.469 0.313,0.156 10 false *1 4.25,2.667 4.563,2.823 0.313,0.156 10 false *2 2.729,3.24 3.042,3.396 0.313,0.156 10 false *1
*1 Front Wheel Opening Extension Pad No. 1 *2 Rear Wheel Opening Extension Pad No. 1


·

An aerodynamics bead is provided in the front fender splash shield sub-assembly (*1 in illustration). As a result, airflow in the wheel housing is introduced to smoothly flow parallel to the tires to make it flow in the wheel housing smoothly, thus ensuring superior maneuver stability.

V113708C01
1.135,0.604 1.292,0.604 1.292,0.604 2.063,1.531 true 4.813,3.115 4.969,3.115 4.969,3.115 5.406,2.688 true 4.833,1.813 4.99,1.813 4.99,1.813 5.229,2.031 true 6.177,3.083 6.333,3.083 6.333,3.083 6.542,2.76 true 0.969,0.521 1.281,0.677 0.313,0.156 10 false *1 6.021,2.99 6.333,3.146 0.313,0.156 10 false *2 5.688,3.396 6,3.552 0.313,0.156 10 false *a 4.677,1.719 4.99,1.875 0.313,0.156 10 false *b 6.01,0.76 6.323,0.917 0.313,0.156 10 false *c 6.135,1.188 6.448,1.344 0.313,0.156 10 false *d 0.896,2.063 1.188,2.313 0.292,0.25 10 false A 1.729,2.073 2.021,2.323 0.292,0.25 10 false A 4.646,3.031 4.958,3.188 0.313,0.156 10 false *1
*1 Front Fender Splash Shield Sub-assembly *2 Front Tire
*a A - A Cross Section *b Aerodynamics Bead
*c Air Flow from Front of Vehicle *d Air Flow from Inside of Vehicle


·

The outer rear view mirror assembly uses an aero stabilizing fin to adjust airflow and ensure superior driving stability.

V113709C01
1.729,0.146 1.885,0.146 1.885,0.146 3.219,1.75 true 2.323,3.646 2.479,3.646 2.479,3.646 3.479,2.49 true 2.156,3.563 2.469,3.719 0.313,0.156 10 false *1 1.573,0.052 1.885,0.208 0.313,0.156 10 false *a
*1 Outer Rear View Mirror Assembly - -
*a Aero Stabilizing Fin - -


·

An aero stabilizing fin is provided on the rear combination light assembly and a type of aerodynamic technology known a vortex generator is used for the fin. Small vortexes are purposely generated in airflow to push the vehicle from the left and right sides, thus achieving excellent operation stability.

V113710C01
1.865,3.594 2.021,3.594 2.021,3.594 2.76,2.396 true 3.906,0.156 3.76,0.156 3.76,0.156 3.104,1.344 true 3.729,3.604 3.583,3.604 3.583,3.604 3.188,2.885 true 3.771,3.521 4.083,3.677 0.313,0.156 10 false *1 1.708,3.5 2.021,3.656 0.313,0.156 10 false *a 3.938,0.063 4.25,0.219 0.313,0.156 10 false *a
*1 Rear Combination Light Assembly - -
*a Aero Stabilizing Fin - -