Home › Engine / Hybrid System › 5L-E ENGINE MECHANICAL › ENGINE UNIT › from 2016.01
NM3250E _51 Engine / Hybrid System _049770 5L-E ENGINE MECHANICAL _0240675 ENGINE UNIT GE GENERAL F

5L-E ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 5L-E engine is an in-line 4-cylinder, 3.0-liter, 8-valve OHC diesel engine. In addition, an Electronic Fuel Injection (EFI) system is used to achieve cleaner emissions.



SPECIFICATION


*: Weight shows the figure with the oil and water fully filled.

No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 8-valve OHC, Belt Drive
Combustion Chamber Swirl Type
Manifolds Cross-flow
Fuel System Distributor Type (Electronically Controlled)
Displacement 2986 cm3 (182.2 cu.in.)
Bore x Stroke 99.5 mm x 96.0 mm (3.92 in. x 3.78 in.)
Compression Ratio 22.2 : 1
Max. Output (EEC) 70 kW @ 4000 rpm
Max. Torque (EEC) 197 N*m @ 2200 rpm
Valve Timing Intake Open 6° BTDC
Closed 50° ABDC
Exhaust Open 53° BBDC
Closed 3° ATDC
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 48 or higher
Emission Regulation -
Engine Service Mass* (Reference) 230 kg (507 lb)


MAIN FEATURES


a.

This engine has been able to achieve the following performance through the use of the items listed below:

(1) High performance and fuel economy

(2) Low noise and vibration

(3) Lightweight and compact design

(4) Good serviceability

(5) Clean emissions


Item (1) (2) (3) (4) (5)
Engine Proper A 4-layer steel-laminate type cylinder head gasket is used. ○ - - - -
A Fiber Reinforced Metal (FRM) ring carrier is used. ○ - - - -
Valve Mechanism An unequal-pitch spring is used for the valve spring. ○ - - - -
Intake and Exhaust System A diesel throttle valve, which is actuated by a step motor, is used. ○ ○ - - ○
Fuel System An electronically controlled injection pump is used. ○ ○ - - ○
A fuel filter, in which the fuel filter element alone can be replaced, is used. - - - ○ -
A fuel filter warning switch that detects the clogging of the fuel filter is used. - - - ○ -
A plastic fuel tank is used. - - ○ - -
Engine Control System Non-contact sensor is used as the accelerator pedal sensor assembly. ○ - - - -
Diesel throttle control is used. ○ - - - -