Home › Engine / Hybrid System › 2TR-FE STARTING › STARTING SYSTEM › from 2016.01
NM3250E _51 Engine / Hybrid System _040044 2TR-FE STARTING _0185066 STARTING SYSTEM GE GENERAL F

2TR-FE STARTING  STARTING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A planetary reduction type starter is used on except models for Cold area or Kazakhstan.


b.

A conventional reduction type starter is used on the models for Cold area or Kazakhstan.


c.

A starter control (cranking hold function) is used on the models with entry and start system. Once the engine switch is pushed, this control continues to operate the starter until the engine has started.



SPECIFICATION


Models for manual transmission
Model Except for Cold Area or Kazakhstan Cold Area or Kazakhstan
Manufacture BOSCH DENSO
Rating Output 1.4 kW 1.3 kW 1.6 kW 2.0 kW
Rating Voltage 12 V 12 V 12 V 12 V
Length*1 201.25 mm (7.92 in.) 183.6 mm (7.23 in.) 190.8 mm (7.51 in.) 131.7 mm (5.19 in.)
Weight 3400 g (7.5 lb) 3200 g (7.1 lb) 3350 g (7.4 lb) 4600 g (10.1 lb)
Rotating Direction*2 Clockwise Clockwise Clockwise Clockwise

HINT:

*1: Length from the mounted area to the rear end of the starter.

*2: Viewed from pinion side.


Models for automatic transmission
Model Except for Cold Area or Kazakhstan Cold Area or Kazakhstan
Manufacture BOSCH DENSO
Rating Output 1.4 kW 1.6 kW 2.0 kW
Rating Voltage 12 V 12 V 12 V
Length*1 201.25 mm (7.92 in.) 190.8 mm (7.51 in.) 131.7 mm (5.19 in.)
Weight 3400 g (7.5 lb) 3350 g (7.4 lb) 4600 g (10.1 lb)
Rotating Direction*2 Clockwise Clockwise Clockwise

HINT:

*1: Length from the mounted area to the rear end of the starter.

*2: Viewed from pinion side.