OUTLINE
An automatic air conditioning system, a manual air conditioning system, a manual cooler system or a manual heater system is used depending on models.
The automatic air conditioning system uses neural network control to enhance comfort.
SPECIFICATIONS
| Item | Specifications | ||
|---|---|---|---|
| Automatic Air Conditioning System | Manual Air Conditioning System | ||
|
*1: Models with 1TR-FE engine, 2TR-FE engine, 1GR-FE engine, 1GD-FTV engine or 2GD-FTV engine *2: Models with 1KD-FTV engine or 2KD-FTV engine *3: Models with 1KD-FTV engine, 2KD-FTV engine (except models for G.C.C. Countries) or 5L-E engine *4: Models for G.C.C. Countries with 1KD-FTV engine or 2KD-FTV engine *5: Models with 1TR-FE engine, 2TR-FE engine, 1GR-FE engine, 1GD-FTVengine or 2GD-FTV engine (except models for G.C.C. Countries) *6: Models for G.C.C. Countries with 1TR-FE engine or 2TR-FE engine *7: Models for G.C.C. Countries with 2GD-FTV engine |
|||
| Blower Motor with Fan Sub-assembly | Motor Type | 4 Pole Motor | |
| Fan Type | Semi-sirocco | ||
| Fan Size (Dia. x H) | 137 mm x 70 mm (5.4 in. x 2.8 in.) | ||
| Cooler Condenser Assembly | Type | Global Inner-fin Condenser | |
| Size (W x H x D) | 580 mm x 517 mm x 11.5 mm (22.8 in. x 20.4 in. x 0.5 in.) | ||
| Fin Pitch | 3.4 mm (0.13 in.)*1
3.0 mm (0.12 in.)*2 |
||
| No. 1 Cooler Evaporator Sub-assembly | Type | Beneficial Refrigerant Stream (BRS) | |
| Size (W x H x D) | 231 mm x 239.5 mm x 38 mm (9.1 in. x 9.4 in. x 1.5in.) | ||
| Fin Pitch | 3.0 mm (0.12 in.) | ||
| Heater Radiator Unit Sub-assembly | Type | Straight Flow Aluminum (SFA)-II | |
| Size (W x H x D) | 222.3 mm x 120 mm x 27 mm (8.8 in. x 4.7 in. 1.1 in.) | ||
| Fin Pitch | 1.8 mm (0.07 in.) | ||
| Cooler Compressor Assembly | Type | 10S15C*3
10S11C*4 10SRE11C*5 10SRE15C*6 10SRE11*7 |
|
| Refrigerant | Type | HFC-134a (R-134a) | |
| Charge Volume | 500 g | ||
| Item | Specifications | ||
|---|---|---|---|
| Manual Cooler System | Manual Heater System | ||
|
*: On models with manual heater system, the No. 1 cooler evaporator sub-assembly has been provided,but is not used. |
|||
| Blower Motor with Fan Sub-assembly | Motor Type | 4 Pole Motor | |
| Fan Type | Semi-sirocco | ||
| Fan Size (Dia. x H) | 137 mm x 70 mm (5.4 in. x 2.8 in.) | ||
| Cooler Condenser Assembly | Type | Global Inner-fin Condenser | - |
| Size (W x H x D) | 580 mm x 517 mm x 11.5 mm (22.8 in. x 20.4 in. x 0.5 in.) | - | |
| Fin Pitch | 3.0 mm (0.12 in.) | - | |
| No. 1 Cooler Evaporator Sub-assembly* | Type | Beneficial Refrigerant Stream (BRS) | |
| Size (W x H x D) | 231 mm x 239.5 mm x 38 mm (9.1 in. x 9.4 in. x 1.5 in.) | ||
| Fin Pitch | 3.0 mm (0.12 in.) | ||
| Heater Radiator Unit Sub-assembly | Type | - | Straight Flow Aluminum (SFA)-II |
| Size (W x H x D) | - | 222.3 mm x 120 mm x 27 mm (8.8 in. x 4.7 in. x 1.1in.) | |
| Fin Pitch | - | 1.8 mm (0.07 in.) | |
| Cooler Compressor Assembly | Type | 10S15C | - |
| Refrigerant | Type | HFC-134a (R-134a) | - |
| Charge Volume | 500 g | - | |
MAIN FEATURES
The air conditioning system has the following features:
| Feature | Outline |
|---|---|
|
*1: Models with automatic air conditioning system *2: Models with pollen removal type clear air filter |
|
| High Performance | ·
Neural network control is used, so passengers can finely control the air conditioning for maximum comfort.*1 ·
Depending on the models, the rear outlets are installed on the back of the center console to ensure comfortable air conditioning performance for the rear passengers. ·
A pollen removal type clean air filter (air refiner element) is used.*2 ·
The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.*1 |
| Light Weight*1 | ·
A bus connector with a built-in IC is used in a lightweight wire harness design to allow for a reduced number of wires. ·
The use of this connector means that pulse pattern type servo motors can be used. |
| Others | The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction:
·
Semi-center Location Air Conditioning Unit ·
Beneficial Refrigerant Stream (BRS) Evaporator ·
Straight Flow Aluminum (SFA)-II Heater Radiator Sub-assembly ·
Global Inner-fin Condenser (GIC) |