Home › Engine / Hybrid System › 2GD-FTV STARTING › STARTING SYSTEM › from 2016.03
NM3250E _51 Engine / Hybrid System _040732 2GD-FTV STARTING _0189070 STARTING SYSTEM GE GENERAL F

2GD-FTV STARTING  STARTING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A planetary reduction type starter is used.


b.

A tandem solenoid type starter assembly is used. This starter uses a structure in which the flow of current is independently supplied to the motor current solenoid and the solenoid used to push out the pinion gear. Due to this, it is possible to restart the engine when the engine has been stopped but is still moving due to inertia, thereby reducing the amount of time to restart the engine during idling stop control.*1


c.

A starter control (cranking hold function) is used.*2

*1: Models with stop and start system

*2: Models with entry and start system or stop and start system




SPECIFICATION


Models with Stop and Start System

*1: Length from the mounted area to the rear end of the starter

*2: Viewed from pinion side

Manufacture DENSO
Rating Output 2.4 kW
Rating Voltage 12 V
Length*1 217.7 mm (8.57 in.)
Weight 10500 g (23.2 lb)
Rotational Direction*2 Clockwise

Models without Stop and Start System

*1: Length from the mounted area to the rear end of the starter

*2: Viewed from pinion side

Manufacture DENSO DENSO BOSCH VALEO
Rating Output 2.7 kW 2.0 kW 1.9 kW 2.2 kW
Rating Voltage 12 V 12 V 12 V 12 V
Length*1 213.5 mm (8.41 in.) 196.1 mm (7.72 in.) 224.0 mm (8.82 in.) 194.0 mm (7.64 in.)
Weight 8400 g (18.5 lb) 3550 g (7.83 lb) 4500 g (9.92 lb) 3850 g (8.49 lb)
Rotational Direction*2 Clockwise Clockwise Clockwise Clockwise