Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2016.03
NM3250E _58 Vehicle Interior _054363 PRE-CRASH SAFETY _0265149 PRE-CRASH SAFETY SYSTEM DE DETAILS F

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  DETAILS  COMBINATION METER  


CONSTRUCTION


a.

The combination meter assembly uses the multi-information display, master warning light, PCS warning light and multi buzzer to provide the driver with pre-crash safety system warnings and indications.

Y199746C01
3.229,1.01 2.917,0.448 true 3.635,0.865 4.188,0.417 true 2.896,2.448 2.875,1.719 true 4.115,2.427 3.917,1.844 true 3.302,3.979 2.854,3.385 true 2.5,4.281 2.135,3.49 true 1.948,4.396 1.333,3.771 true 2.792,5.333 2.792,4.781 true 0.385,0.25 0.792,0.531 0.406,0.281 12 false *A: 3.51,2.396 3.823,2.552 0.313,0.156 10 false *1 2.74,0.26 3.052,0.417 0.313,0.156 10 false *a 2.833,2.51 3.146,2.667 0.313,0.156 10 false *b 4.104,2.479 4.417,2.635 0.313,0.156 10 false *c 4.177,0.24 4.49,0.396 0.313,0.156 10 false *d 0.427,3.146 0.833,3.427 0.406,0.281 12 false *B: 3.448,5.323 3.76,5.479 0.313,0.156 10 false *1 1.198,3.635 1.51,3.792 0.313,0.156 10 false *a 2.042,3.313 2.354,3.469 0.313,0.156 10 false *b 2.74,3.208 3.052,3.365 0.313,0.156 10 false *c 2.729,5.354 3.042,5.51 0.313,0.156 10 false *d
*A Models with Analog Type Combination Meter Assembly with Dot Display Type Multi-information Display *B Models with Optitron Type Combination Meter Assembly
*1 Combination Meter Assembly - -
*a PCS Warning Light *b VSC OFF Indicator Light
*c Multi-information Display *d Master Warning Light



b.

If the forward recognition camera and/or millimeter wave radar sensor assembly determines that the possibility of a collision is high, it sends a signal to the combination meter assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the multi-information display, master warning light, PCS warning light and skid control buzzer assembly. Details are indicated below.

When there is a high possibility of a collision
Multi-information Display PCS Warning Light Skid Control Buzzer Assembly
BRAKE! - Sounds continuously


c.

When the system is not available, the following warning occurs to warn the driver.

i.

Models with Analog Type Combination Meter Assembly with Dot Display Type Multi-information Display

When a system malfunction is detected
Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
This message appears when the forward recognition camera and/or millimeter wave radar sensor assembly detects a system malfunction. PRE-CRASH SAFETY MALFUNCTION VISIT YOUR DEALER Illuminates Flashes Sounds once
Millimeter wave radar sensor assembly is temporarily malfunctioning.
·

Millimeter wave radar sensor assembly voltage is abnormal.

·

Millimeter wave radar sensor assembly temperature is outside of operating range.

·

Other malfunction exists in millimeter wave radar sensor assembly.


PRE-CRASH SAFETY UNAVAILABLE - Flashes -
Forward recognition camera is temporarily malfunctioning.
·

Forward recognition camera voltage is abnormal.

·

Forward recognition camera temperature is outside of operating range.


FORWARD CAMERA SYSTEM UNAVAILABLE - Flashes -
Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly. PRE-CRASH SAFETY UNAVAILABLE CLEAN SENSOR - Flashes -
Dirty windshield glass over the forward recognition camera. FORWARD CAMERA SYSTEM UNAVAILABLE CLEAN WINDSHIELD - Flashes -

When the pre-crash safety system is turned off
Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
Pre-crash safety system operation is disabled. PRE-CRASH SAFETY OFF - Illuminates -

When in VSC OFF mode
Condition Multi-information Display Master Warning Light PCS Warning Light VSC OFF Indicator Light
·

This message appears for 6 seconds on the multi-information display.

·

Pre-crash brake and pre-crash brake assist operation is disabled (a warning that occurs when there is a high possibility of a collision is still enabled).


VSC TURNED OFF PRE-CRASH BRAKE SYSTEM UNAVAILABLE - Illuminates Illuminates


ii.

Models with Optitron Type Combination Meter Assembly

When a system malfunction is detected
Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
This message appears when the forward recognition camera and/or millimeter wave radar sensor assembly detects a system malfunction. Pre-Crash Safety Malfunction Visit Your Dealer Illuminates Flashes Sounds once
Millimeter wave radar sensor assembly is temporarily malfunctioning.
·

Millimeter wave radar sensor assembly voltage is abnormal.

·

Millimeter wave radar sensor assembly temperature is outside of operating range.

·

Other malfunction exists in millimeter wave radar sensor assembly.


Pre-Crash Safety Unavailable - Flashes -
Forward recognition camera is temporarily malfunctioning.
·

Forward recognition camera voltage is abnormal.

·

Forward recognition camera temperature is outside of operating range.


Forward Camera System Unavailable - Flashes -
Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly. Pre-Crash Safety Unavailable Clean Sensor - Flashes -
Dirty windshield glass over the forward recognition camera. Forward Camera System Unavailable Clean Windshield - Flashes -

When the pre-crash safety system is turned off
Condition Multi-information Display Master Warning Light PCS Warning Light Multi Buzzer
Pre-crash safety system operation is disabled. Pre-Crash Safety Off - Illuminates -

When in VSC OFF mode
Condition Multi-information Display Master Warning Light PCS Warning Light VSC OFF Indicator Light
·

This message appears for 6 seconds on the multi-information display.

·

Pre-crash brake and pre-crash brake assist operation is disabled (a warning that occurs when there is a high possibility of a collision is still enabled).


VSC Turned Off Pre-Crash Brake System Unavailable - Illuminates Illuminates