Home › Engine / Hybrid System › 2GD-FTV IDLING STOP CONTROL › STOP AND START › from 2016.03
NM3250E _51 Engine / Hybrid System _054807 2GD-FTV IDLING STOP CONTROL _0266882 STOP AND START DE DETAILS F

2GD-FTV IDLING STOP CONTROL  STOP AND START  DETAILS  COMBINATION METER  


OPERATION


a.

The combination meter assembly receives the idling on/off signals from the engine stop and start ECU.


b.

By changing the display mode of the multi-information display by operating the multi-information switch on the steering pad switch assembly, the amount of time idling stop was performed since the engine switch was turned on (IG) to when the engine switch was turned off or the amount of time idling stop was performed since the reset switch was last pressed can be displayed.


c.

The system operation status or warning information is indicated to the driver through the following means:

·

Illuminating or blinking the stop and start indicator light and stop and start cancel indicator light.

·

Sounding a buzzer.

·

Displaying other information on the multi-information display.


Y177308C01
4.146,5.094 3.76,4.427 true 2.823,1.552 3.135,1.708 0.313,0.156 10 false *1 4.333,1.563 4.646,1.719 0.313,0.156 10 false *2 4.188,5.031 4.5,5.188 0.313,0.156 10 false *3
*1 Stop and Start Indicator Light *2 Stop and Start Cancel Indicator Light
*3 Multi-information Display - -


Stop and Start Indicator Light Operation
Item Condition Stop and Start Indicator Light Buzzer
System Operating (Engine is stopped) The vehicle is operating normally. Illuminates Does not sound
The driver's door is opened with the shift lever in D or S.*1 Blinks Sounds
The shift lever is operated without depressing the clutch pedal.*2

HINT:

*1: Models with automatic transmission

*2: Models with manual transmission


Stop and Start Cancel Indicator Light Operation
Condition Stop and Start Cancel Indicator Light
The vehicle is stopped and system operation conditions are met. Off
The stop and start system is preventing the engine stop control from operating. Illuminates
The ecorun cancel switch assembly is on.
Any Diagnostic Trouble Codes (DTCs) are detected. Blinks
The number of times the starter assembly has been operated exceeds the threshold.
The combined engine start and restart count exceeds the threshold.

Multi-information Display
Stop and Start System Condition Multi-information Display Message Vehicle Condition
When the engine cannot be stopped by the stop and start system
V115706

"For Climate Control"
·

The air conditioning system is being used when the ambient temperature is high or low.

·

Windshield defogger is pressed.


"Battery Charging"
·

The battery charge amount may be low.

·

A refresh charge may be occurring.

·

The engine may have been started with the hood opened

·

The battery may be cold

·

The battery may be extremely hot


"For Brake System"
·

The brake booster load decreased.

·

The vehicle is operated at a high elevation.


"Driver Seat Belt Unbuckled" The driver seat belt is not fastened.
When the engine automatically restarts while stopped by the atop and start system
V115706

"For Climate Control"
·

The air conditioning system is turned on or the air conditioning is being used.

·

Windshield defogger is turned on.


"For Brake System" The brake pedal is strongly depressed further or pumped.
"Battery Charging" The battery charge amount may be low.
"Steering Wheel Turned" The steering wheel is turned.
"Driver Seat Belt Unbuckled" The driver seat belt is not fastened.
Display of prohibition Status of Engine Restart during idling stop Operation - "Stop & start system active"
"Shift to N and depress"
"clutch to restart."
The shift lever is moved from N to another position without depressing the clutch pedal.
Stop and start system may be malfunctioning - "Stop & Start System Malfunction"
Inspect at dealer
-