Home › Power Source / Network › 2GD-FTV BATTERY / CHARGING › CHARGING SYSTEM › from 2016.03
NM3250E _57 Power Source / Network _054808 2GD-FTV BATTERY / CHARGING _0266983 CHARGING SYSTEM DE DETAILS F

2GD-FTV BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY SENSOR  


CONSTRUCTION


a.

The battery sensor (battery state sensor assembly) installed to the negative (-) battery terminal calculates the current, voltage, battery temperature, SOC (battery charging percentage), SOH (battery degradation percentage), SOF (starting performance) and self-diagnosis result and sends these signals to the ECM via LIN communication.

Y177248C01
3.604,1.24 5.938,0.885 true 6,0.781 6.313,0.979 0.313,0.198 10 false *1
*1 Battery Sensor (Battery State Sensor Assembly) - -



b.

To detect the current, a shunt resistor installed inside the battery sensor (battery state sensor assembly) is used to convert and calculate the voltage generated in the shunt resistor due to the battery charge and discharge current.


c.

The battery temperature is calculated from the resistance value of the thermistor built in the battery sensor (battery state sensor assembly)