Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › MASS AIR FLOW METER
RM3250E _51 Engine / Hybrid System _037981 1GR-FE ENGINE CONTROL _0176370 MASS AIR FLOW METER A

1GR-FE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY

HINT:

Perform "Inspection After Repairs" after replacing the intake mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>1GR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.

Install a new O-ring to the intake mass air flow meter sub-assembly.


b.

Install the intake mass air flow meter sub-assembly with the 2 screws.

Torque:
0.97 N*m (10 kgf*cm, 9 in.*lbf)


c.

Connect the intake mass air flow meter connector.