Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › DRIVE BELT
RM3250E _51 Engine / Hybrid System _037982 1GR-FE ENGINE MECHANICAL _0177648 DRIVE BELT A

1GR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

a.
A346247C01
0.458,4.125 0.458,3.625 true 0.469,3.917 0.823,3.917 0.823,3.917 0.823,3.688 false 0.49,2.469 0.729,2.635 0.24,0.167 10 false *a 0.396,4.146 0.615,4.323 0.219,0.177 10 false *b
*a Turn
*b Hole


While turning the V-ribbed belt tensioner assembly counterclockwise, align the service hole for the V-ribbed belt tensioner assembly and the belt tensioner fixing position, and then insert a bar with a diameter of 6.0 mm (0.236 in.) into the service hole to fix the V-ribbed belt tensioner assembly in place.

HINT:

The pulley bolt for the belt tensioner has a left-hand thread.



b.

Remove the fan and generator V belt.