Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PRESSURE PULSATION DAMPER
RM3250E _51 Engine / Hybrid System _037983 1GR-FE FUEL _0177661 FUEL PRESSURE PULSATION DAMPER A

1GR-FE FUEL  FUEL PRESSURE PULSATION DAMPER  INSTALLATION  


PROCEDURE

Hide 23270 1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

a.

Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper assembly.


b.

Install the fuel pressure pulsation damper assembly to the fuel delivery pipe sub-assembly.


c.

Install the fuel pressure regulator holder to the fuel pressure pulsation damper assembly.


Hide 17129 2.INSTALL INTAKE AIR SURGE TANK

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION