16100
1.INSTALL ENGINE WATER PUMP ASSEMBLY
|
Bolt A |
|
Bolt B |
Install a new gasket and the engine water pump assembly with the 10 bolts.
Make sure that there is no oil on the threads of bolts A.
16620D
2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
|
Bolt A |
|
Bolt B |
|
Bolt C |
Temporarily install the V-ribbed belt tensioner assembly with the 3 bolts.
Make sure the flanges of the bolts are contacting the tensioner surface.
Install the V-ribbed belt tensioner assembly by tightening the 3 bolts in the order shown in the illustration.
16603
3.INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY
| *1 | Spacer |
| *2 | No. 1 Idler Pulley Sub-assembly |
Install the spacer and No. 1 idler pulley sub-assembly with the bolt.
15301
4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
Install a new O-ring and the engine oil level dipstick guide with the bolt.
Install the engine oil level dipstick.
27020
5.INSTALL GENERATOR ASSEMBLY
16711
6.INSTALL FAN SHROUD
16470
7.INSTALL RADIATOR RESERVOIR
16572
8.INSTALL RADIATOR HOSE OUTLET
16571
9.INSTALL RADIATOR HOSE INLET
10.ADD ENGINE COOLANT
11.INSPECT FOR COOLANT LEAK
51410
12.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY