Do not remove the radiator cap sub-assembly, cylinder block drain cock plugs or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
51410
1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
2.DRAIN ENGINE COOLANT
16571
3.REMOVE RADIATOR HOSE INLET
16572
4.REMOVE RADIATOR HOSE OUTLET
16470
5.REMOVE RADIATOR RESERVOIR
16711
6.REMOVE FAN SHROUD
27020
7.REMOVE GENERATOR ASSEMBLY
15301
8.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
Remove the engine oil level dipstick.
Remove the bolt, engine oil level dipstick guide and O-ring.
Cover the guide hole to prevent foreign matter from entering it.
16603
9.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY
Remove the bolt, No. 1 idler pulley sub-assembly and spacer.
16620D
10.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
Remove the 3 bolts and V-ribbed belt tensioner assembly.
16100
11.REMOVE ENGINE WATER PUMP ASSEMBLY
Remove the 10 bolts, engine water pump assembly and gasket.