Home › Engine / Hybrid System › 1TR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM3250E _51 Engine / Hybrid System _037997 1TR-FE ENGINE CONTROL _0181522 CAMSHAFT OIL CONTROL VALVE G

1TR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 11101J 1.CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

for Intake Side:

i.

Connect the GTS to the DLC3.


ii.

Start the engine.


iii.

Turn the GTS on.


iv.

Warm up the engine.


v.

Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Linear (Bank 1).

Powertrain > Engine > Active Test
Tester Display
Control the VVT Linear (Bank1)
50004 234 32

vi.

Check the engine speed while operating the camshaft timing oil control valve assembly using the GTS.

Specified Condition:
GTS Operation Specified Condition
0% Normal engine speed
100% Engine idles roughly or stalls


If the result is not as specified, check the camshaft timing oil control valve assembly, wiring and ECM.



b.

for Exhaust Side:

i.

Connect the GTS to the DLC3.


ii.

Start the engine.


iii.

Turn the GTS on.


iv.

Warm up the engine.


v.

Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1).

Powertrain > Engine > Active Test
Tester Display
Control the VVT Exhaust Linear (Bank1)
50004 234 87

vi.

Check the engine speed while operating the camshaft timing oil control valve assembly using the GTS.

Specified Condition:
GTS Operation Specified Condition
0% Normal engine speed
100% Engine idles roughly or stalls


If the result is not as specified, check the camshaft timing oil control valve assembly, wiring and ECM.