Home › Engine / Hybrid System › 1TR-FE ENGINE CONTROL › THROTTLE BODY
RM3250E _51 Engine / Hybrid System _037997 1TR-FE ENGINE CONTROL _0181523 THROTTLE BODY G

1TR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A223680C22
2.271,1.542 2.271,1.177 true 2.667,1.542 2.667,1.177 true 2.167,1.552 2.417,1.74 0.25,0.188 10 false M+ 2.604,1.552 2.854,1.74 0.25,0.188 10 false M- 0.083,0.115 0.333,0.302 0.25,0.188 10 false *a
*a Component without harness connected
(Throttle Body with Motor Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body with motor assembly.