Home › Engine / Hybrid System › 1TR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM3250E _51 Engine / Hybrid System _037997 1TR-FE ENGINE CONTROL _0181530 ENGINE COOLANT TEMPERATURE SENSOR A

1TR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>1TR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.

Install a new gasket to the engine coolant temperature sensor.


b.

Install the engine coolant temperature sensor.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


c.

Connect the engine coolant temperature sensor connector.