Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM3250E _56 Audio / Visual / Telematics _038052 AUDIO / VIDEO _0182296 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Disc cannot be Ejected  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK OPERATION
a.

Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the disc is ejected.

OK:

Disc is ejected.



Result:
Proceed to
OK
NG



OK

2.REPLACE DISC AND RECHECK

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

2.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Disc is ejected.



Result:
Proceed to
OK
NG



OK

END (DISC IS DEFECTIVE)

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY