Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM3250E _56 Audio / Visual / Telematics _038052 AUDIO / VIDEO _0182296 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Cannot Connect to Center  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>PRECAUTION


PROCEDURE

1.CHECK SETTINGS
a.

Check the "iPhone", "iPod touch" or "MirrorLink" compatible smartphone settings.


Result:
Result Proceed to
Data communication is enabled, a SIM card is inserted and reception is good. A
Data communication is disabled. B
A SIM card is not inserted (for "iPhone", "MirrorLink" compatible smartphone). C
Reception is poor or the smartphone is outside the service area. D



A

2.CHECK APPLICATION

B

ENABLE DATA COMMUNICATION

C

INSERT SIM CARD

D

USE IN LOCATION WITH GOOD RECEPTION

2.CHECK APPLICATION
a.

Check if a Connected Services compatible application is installed on the connected "iPhone", "iPod touch" or "MirrorLink" compatible smartphone.

HINT:
·

Some applications require payment.

·

The names of applications are subject to change.




Result:
Result Proceed to
A Connected Services compatible application is installed. A
A Connected Services compatible application is not installed. B



A

3.CHECK APPLICATION RUNNING STATUS

B

INSTALL CONNECTED SERVICES COMPATIBLE APPLICATION

3.CHECK APPLICATION RUNNING STATUS
a.

Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, and touch "Connected services" on the information screen of the radio and display receiver assembly with a Connected Services compatible application running.

HINT:

The Connected Services function may not start if the application is not running.


Result:
Result Proceed to
The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated. A
The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone cannot be operated. B




A

END

B

4.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
4.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
a.

Replace the No. 1 stereo jack adapter assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>STEREO JACK ADAPTER ASSEMBLY>REMOVAL

OK:

The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated.



Result:
Result Proceed to
OK A
NG (for "MirrorLink" compatible smartphone) B
NG (for "iPhone", "iPod touch") C



A

END

B

5.CHECK "Bluetooth" CONNECTION

C

6.CHECK PRODUCT INFORMATION (OPERATION CHECK)
5.CHECK "Bluetooth" CONNECTION
a.

Check that the head unit and "MirrorLink" compatible smartphone can be connected using "Bluetooth".


Result:
Result Proceed to
Can be connected using "Bluetooth". A
Cannot be connected using "Bluetooth". B



A

6.CHECK PRODUCT INFORMATION (OPERATION CHECK)

B

GO TO ""Bluetooth" COMPATIBLE CELLULAR PHONE CANNOT BE CONNECTED" IN PROBLEM SYMPTOMS TABLE

6.CHECK PRODUCT INFORMATION (OPERATION CHECK)
a.

Contact the on-site operator and register the user.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>PRECAUTION

OK:

The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated.



Result:
Proceed to
OK
NG



OK

END

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY