Home › Suspension › REAR SUSPENSION › REAR LEAF SPRING(for 4WD and Pre-Runner) › 2015.06–2016.01
RM3250E _53 Suspension _038042 REAR SUSPENSION _0182547 REAR LEAF SPRING(for 4WD and Pre-Runner) A

REAR SUSPENSION  REAR LEAF SPRING(for 4WD and Pre-Runner)  DISASSEMBLY  


PROCEDURE

Hide 48210G 1.REMOVE REAR LOWER SPRING SHACKLE BUSH

a.

Using a screwdriver, remove the 2 rear spring shackle lower bushes from the rear leaf spring assembly LH.

HINT:

Tape the screwdriver tip before use.



Hide 48220 2.DISASSEMBLE REAR SPRING ASSEMBLY LH

C236367

a.

Secure the rear leaf spring assembly in a vise between aluminum plates.


b.

Using a brass bar and hammer, pry open the 4 spring clips of the rear No. 3 leaf spring.

NOTICE:

Do not damage the leaf spring.



c.
C236368

Secure the spring with a vise as shown in the illustration.


d.

Remove the nut and center bolt.


e.

except Single Cab:

Remove the 2 rear No. 3 spring spacers.


f.

Remove the rear No. 1 spring spacer.


Hide 48252 3.REMOVE REAR SPRING SILENCER

a.

Remove the 4 rear spring silencers from the leaf spring.


Hide 48210C 4.REMOVE REAR SPRING LEAF BUSH

C322868N01
0.802,1.865 0.938,1.865 0.938,1.865 1.135,1.531 true 0.896,0.885 1.146,0.885 false 0.594,0.802 1.052,1 0.458,0.198 10 false SST 0.51,1.792 0.969,1.99 0.458,0.198 10 false SST

a.

Using SST and a press, remove the rear spring leaf bush from the rear No. 1 spring leaf.

SST
09631-12090  
09632-36010