Home › Engine / Hybrid System › 1TR-FE FUEL › FUEL PUMP(for Short Wheelbase)
RM3250E _51 Engine / Hybrid System _037999 1TR-FE FUEL _0182613 FUEL PUMP(for Short Wheelbase) A

1TR-FE FUEL  FUEL PUMP(for Short Wheelbase)  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>1TR-FE FUEL>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 23220A 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>1TR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.
A350530

Install the fuel pump harness and connect the fuel pump connector.


b.

Apply a light coat of gasoline to a new O-ring.


c.
A344554C01
2.885,0.281 3.01,0.281 3.01,0.281 3.104,0.521 false 2.708,1 3.021,1 true 2.083,1.115 2.365,1.115 true 3.052,0.927 3.24,1.115 0.188,0.188 10 true *1 1.938,1.042 2.115,1.229 0.177,0.188 10 true *2 2.719,0.188 2.906,0.385 0.188,0.198 10 false *a
*1 O-Ring
*2 Spacer
*a Supporter


Install the O-ring and spacer to the supporter of the fuel pump as shown in the illustration.


d.
A350529

Attach the 3 claws to the claw holes and connect the fuel pump.


Hide 77131C 2.INSTALL NO. 1 FUEL SUB-TANK

a.
A350528

Attach the 2 claws to the claw holes and install the No. 1 fuel sub-tank.


b.
A350527

Attach the 3 claws to the claw holes.


c.
A350526

Connect the 2 fuel tubes and wire harness.


d.
A350525

Attach the claw on the end of the tube to the claw hole. Connect the tube to the 2 clamps on the No. 1 fuel sub-tank.


e.
A350524

Connect the fuel pump connector and wire harness.


Hide 83320 3.INSTALL FUEL SENDER GAUGE ASSEMBLY