Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE
RM3250E _59 Vehicle Exterior _038080 EXTERIOR PANELS / TRIM _0182646 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


PROCEDURE

Hide 75459B 1.REMOVE NO. 2 TAIL GATE MARK

HINT:

When removing the No. 2 tail gate mark, heat the vehicle body and No. 2 tail gate mark using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
No. 2 Tail Gate Mark 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.
B399444C01
1,1.125 0.76,1.125 0.76,1.125 0.76,0.802 true 1.042,1.042 1.354,1.24 0.313,0.198 10 true *a
*a Wooden Block
V100155

Protective Tape


Put protective tape around the No. 2 tail gate mark.


b.

Insert piano wire between the vehicle body and No. 2 tail gate mark.


c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the No. 2 tail gate mark to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the No. 2 tail gate mark.


Hide 75471D 2.REMOVE REAR NAME PLATE

HINT:

When removing the rear name plate, heat the vehicle body and rear name plate using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.
B399445C01
1.156,1.125 0.875,1.125 0.875,1.125 0.875,0.833 true 1.198,1.052 1.51,1.25 0.313,0.198 10 true *a
*a Wooden Block
V100155

Protective Tape


Put protective tape around the rear name plate.


b.

Insert piano wire between the vehicle body and rear name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the rear name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the rear name plate.


Hide 75459 3.REMOVE TAIL GATE MARK

HINT:

When removing the tail gate mark, heat the vehicle body and tail gate mark using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Tail Gate Mark 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Put protective tape around the tail gate mark.


b.

Insert piano wire between the vehicle body and tail gate mark.


c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.
B410844C01
2.458,0.594 2.74,0.594 false 2.781,0.51 3.094,0.708 0.313,0.198 10 false *a
*a Wooden Block
V100155

Protective Tape


Pull the piano wire and scrape off the double-sided tape that holds the tail gate mark to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the tail gate mark.


Hide 75479A 4.REMOVE NO. 3 TAIL GATE MARK

HINT:

When removing the No. 3 tail gate mark, heat the vehicle body and No. 3 tail gate mark using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
No. 3 Tail Gate Mark 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Using a heat light, heat the vehicle body and No. 3 tail gate mark.


b.
B410835

Pull back an edge of the No. 3 tail gate mark and pull it parallel to the vehicle body to remove it.


Hide 75427 5.REMOVE FRONT DOOR NAME PLATE

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

When removing the front door name plate, heat the vehicle body and front door name plate using a heat light.



Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Front Door Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.
B399446C01
1.146,1.188 0.885,1.188 0.885,1.188 0.885,0.917 true 1.177,1.104 1.49,1.302 0.313,0.198 10 true *a
*a Wooden Block
V100155

Protective Tape


Put protective tape around the front door name plate.


b.

Insert piano wire between the vehicle body and front door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the front door name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the front door name plate.


Hide 75428B 6.REMOVE FRONT DOOR NO. 2 NAME PLATE

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

When removing the front door No. 2 name plate, heat the vehicle body and front door No. 2 name plate using a heat light.



Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Front Door No. 2 Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.
B410841C01
0.438,1.115 0.781,1.115 0.781,1.115 0.781,0.792 true 2.865,3.385 2.615,3.385 2.615,3.385 2.615,3.063 true 0.115,1.01 0.427,1.208 0.313,0.198 10 true *a 2.875,3.292 3.188,3.49 0.313,0.198 10 true *a
*a Wooden Block
V100155

Protective Tape


Put protective tape around the front door No. 2 name plate.


b.

Insert piano wire between the vehicle body and front door No. 2 name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the front door No. 2 name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the front door No. 2 name plate.