53510
1.INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
| *a | Component without harness connected (Hood Lock Assembly) |
| *b | Unlock Position |
| *c | Lock Position |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (E) - 2 (+) | Opened | 10 kΩ or higher |
| Locked | Below 1 Ω |
If the result is not as specified, replace the hood lock assembly (engine hood courtesy switch).