87120G
1.INSPECT VISCOUS HEATER WITH MAGNET CLUTCH ASSEMBLY
| *a | Component without harness connected
(Viscous Heater with Magnet Clutch Assembly) |
Inspect the magnet clutch assembly.
Disconnect the connector.
Apply battery voltage to the clutch and check the operation of the clutch.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1(MG+)
Battery negative (-) → Body ground |
Magnet clutch is engaged |
If the result is not as specified, replace the viscous heater with magnet clutch assembly.