53117C
1.REMOVE NO. 1 RADIATOR GRILLE RETAINER
Remove the 8 clips and No. 1 radiator grille retainer.
52119A
2.REMOVE FRONT BUMPER COVER
| *A | for Standard Body |
| *B | for Wide Body |
| *a | 90° |
|
Rotation Direction |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
Use the same procedure for the pin hold clips on the other side.
Remove the clip.
Use the same procedure for the clip on the other side.
| *a | Bolt |
| *b | Screw |
Remove the 6 screws and 3 bolts.
Put protective tape around the front bumper cover.
| *A | for Standard Body | *B | for Wide Body |
|
Protective Tape | - | - |
| *a | Bolt |
| *b | Screw |
Remove the 2 screws and 2 bolts.
w/o Energy Absorber:
Remove the 3 screws.
|
Screw |
|
Clip |
w/ Energy Absorber:
Remove the 3 screws and 2 clips.
|
Place Hands Here |
|
Remove in this Direction |
for Standard Body:
Detach the claw as shown in the illustration.
Use the same procedure for the claw on the other side.
|
Place Hands Here |
|
Remove in this Direction |
for Wide Body:
Detach the claw as shown in the illustration.
Use the same procedure for the claw on the other side.
w/ Fog Light:
Disconnect the connector.
| *A | for Standard Body |
| *B | for Wide Body |
|
Remove in this Direction |
Remove the front bumper cover as shown in the illustration.
52614
3.REMOVE FRONT BUMPER NO. 2 ENERGY ABSORBER (w/ Energy Absorber)
|
Remove in this Direction |
Remove the 3 bolts and front bumper No. 2 energy absorber as shown in the illustration.
53294C
4.REMOVE RADIATOR SIDE DEFLECTOR LH
|
Remove in this Direction |
w/ Intercooler, w/ Energy Absorber:
Detach the claw and remove the radiator side deflector LH as shown in the illustration.
|
Remove in this Direction |
w/ Intercooler, w/o Energy Absorber:
Detach the claw and remove the radiator side deflector LH as shown in the illustration.
|
Remove in this Direction |
w/o Intercooler, w/ Energy Absorber:
Detach the claw and remove the radiator side deflector LH as shown in the illustration.
|
Remove in this Direction |
w/o Intercooler, w/o Energy Absorber:
Detach the claw and remove the radiator side deflector LH as shown in the illustration.
53293C
5.REMOVE RADIATOR SIDE DEFLECTOR RH
Use the same procedure described for the LH side.
52678
6.REMOVE FRONT BUMPER NO. 2 SIDE SUPPORT LH (w/ Energy Absorber)
Remove the 2 bolts and front bumper side support LH.
52677
7.REMOVE FRONT BUMPER NO. 2 SIDE SUPPORT RH (w/ Energy Absorber)
Use the same procedure described for the LH side.
53163A
8.REMOVE FRONT BUMPER STONE DEFLECTOR LH
|
Remove in this Direction |
Detach the claw and guide and remove the front bumper stone deflector LH as shown in the illustration.
53162A
9.REMOVE FRONT BUMPER STONE DEFLECTOR RH
Use the same procedure described for the LH side.
52601
10.REMOVE FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY (w/ Energy Absorber)
|
Remove in this Direction |
Detach the clip and remove the front bumper energy absorber sub-assembly as shown in the illustration.
52021
11.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
|
Remove in this Direction |
Remove the 4 bolts and front bumper reinforcement sub-assembly as shown in the illustration.
52116A
12.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Standard)
| *a | 90° |
|
Rotation Direction |
|
Remove in this Direction |
Remove the bolt and clip.
Using a screwdriver, turn the clip 90° and remove the clip.
Detach the claw and remove the front bumper side support LH as shown in the illustration.
52115A
13.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Standard)
Use the same procedure described for the LH side.
52116A
14.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Wide Body)
| *a | 90° |
|
Rotation Direction |
|
Remove in this Direction |
Remove the bolt and clip.
Using a screwdriver, turn the clip 90° and remove the 2 clips.
Detach the claw and remove the front bumper side support LH as shown in the illustration.
52115A
15.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Wide Body)
Use the same procedure described for the LH side.