Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ENGINE HOOD MOULDING
RM3250E _59 Vehicle Exterior _038080 EXTERIOR PANELS / TRIM _0184368 ENGINE HOOD MOULDING A

EXTERIOR PANELS / TRIM  ENGINE HOOD MOULDING  REMOVAL  


PROCEDURE

Hide 75777E 1.REMOVE FRONT HOOD MOULDING PAD

a.
B403623

Remove the 8 clips and front hood protector.


Hide 75770 2.REMOVE FRONT HOOD MOULDING ASSEMBLY

HINT:

When removing the front hood moulding assembly, heat the vehicle body and front hood moulding assembly using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Front Hood Moulding Assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.
B410795C01
1.75,1.24 1.667,1.219 false
V100155

Protective Tape


Put protective tape around the front hood moulding assembly.


b.

Insert piano wire between the vehicle body and front hood moulding assembly.

B410796C01
5.479,1.115 5.479,0.76 true 6.188,1.01 6.188,0.656 true 2.073,1.625 2.073,0.927 2.073,0.927 2.302,0.927 true 5.542,1.948 5.698,2.146 0.156,0.198 10 true A 4.969,2.854 5.125,3.052 0.156,0.198 10 true A 5.083,0.25 5.542,0.49 0.458,0.24 10 false A - A 5.427,1.125 5.583,1.323 0.156,0.198 10 false *a 6.135,1.031 6.292,1.229 0.156,0.198 10 false *a 2.344,0.865 2.573,1.094 0.229,0.229 10 true *b
*a Double-sided Tape *b Wooden Block



c.

Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.


d.

Pull the piano wire and scrape off the double-sided tape that holds the front hood moulding assembly to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the front hood moulding assembly.


f.

Turn the 4 clips labeled A 90° and remove the 4 clips labeled A.

B410797C01
1.26,1.583 1.26,1.302 false 2.135,1.927 2.135,1.646 true 4.219,2.708 4.219,2.427 true 5.406,3.146 5.406,2.865 true 3.104,2.583 3.104,2.052 true 1.229,1.615 1.438,1.844 0.208,0.229 10 true A 2.094,1.958 2.25,2.146 0.156,0.188 10 true A 4.188,2.75 4.344,2.938 0.156,0.188 10 true A 5.375,3.167 5.531,3.354 0.156,0.188 10 true A 1.958,0.177 2.146,0.375 0.188,0.198 10 true *a 2.896,0.75 3.083,0.948 0.188,0.198 10 true *a 4.583,1.083 4.771,1.281 0.188,0.198 10 true *a 5.854,1.438 6.042,1.635 0.188,0.198 10 true *a 3.063,2.604 3.219,2.792 0.156,0.188 10 true B
*a 90° - -
V113147

Rotation Direction - -



g.

Using pliers, grip the claws of the clip labeled B and remove the clip labeled B as shown in the illustration.