Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ENGINE HOOD MOULDING
RM3250E _59 Vehicle Exterior _038080 EXTERIOR PANELS / TRIM _0184368 ENGINE HOOD MOULDING A

EXTERIOR PANELS / TRIM  ENGINE HOOD MOULDING  INSTALLATION  


PROCEDURE

Hide 75770 1.INSTALL FRONT HOOD MOULDING ASSEMBLY

HINT:

When installing the front hood moulding assembly, heat the vehicle body and front hood moulding assembly using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Front Hood Moulding Assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove the double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new front hood moulding assembly.

i.

Using a heat light, heat the vehicle body and the front hood moulding assembly.


ii.

Remove the peeling paper from the face of the double-sided tape.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Attach the clip to install the front hood moulding assembly as shown in the illustration.

HINT:

Press the front hood moulding assembly firmly to install it.


B410811C01
1.344,1.896 1.281,1.833 false 3.24,1.802 3.24,1.375 3.24,1.375 3.573,1.375 true 4.281,2.302 4.281,1.875 4.281,1.875 4.615,1.875 true 5.885,2.698 5.885,2.271 5.885,2.271 6.219,2.271 true 3.625,2.135 3.625,2.885 3.625,2.885 3.896,2.885 true 5.042,2.563 5.042,3.167 5.042,3.167 5.313,3.167 true 6.635,3.125 6.635,2.802 true 3.604,1.292 3.844,1.521 0.24,0.229 10 true *a 4.656,1.781 4.896,2.01 0.24,0.229 10 true *a 6.25,2.188 6.49,2.417 0.24,0.229 10 true *a 6.573,3.135 6.813,3.365 0.24,0.229 10 false *a 5.344,3.083 5.583,3.313 0.24,0.229 10 false *a 3.927,2.781 4.167,3.01 0.24,0.229 10 false *a
*a Double-sided Tape - -
V113147

Install in this Direction - -



iv.

Remove the protection film from the face of the front hood moulding assembly.



Hide 75777E 2.INSTALL FRONT HOOD MOULDING PAD

a.

Install the front hood protector with the 8 clips.