11303A
1.INSTALL TIMING CHAIN CASE OIL SEAL
Apply MP grease to the lip of a new timing chain case oil seal.
Do not allow foreign matter to contact the lip of the timing chain case oil seal.
Do not allow MP grease to contact the dust seal.
Temporarily install the timing chain case oil seal to the timing chain cover sub-assembly.
Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover edge.
Keep the lip free from foreign matter.
Do not tap the timing chain case oil seal at an angle.
13471
2.INSTALL CRANKSHAFT PULLEY
16711
3.INSTALL FAN SHROUD
4.INSPECT FOR OIL LEAK
5.INSPECT ENGINE OIL LEVEL