Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL PRESSURE REGULATOR
RM3250E _51 Engine / Hybrid System _038023 2TR-FE FUEL _0184674 FUEL PRESSURE REGULATOR A

2TR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.
A346788C01
1,1.771 1.219,1.771 1.219,1.771 1.969,1.438 true 0.802,1.677 1,1.875 0.198,0.198 10 false *1
*1 O-Ring


Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly with the 3 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


c.

Connect the vacuum hose.


d.

Attach the wire harness clamp.


e.

Connect the throttle body connector.


f.

Connect the purge VSV connector.


Hide 23273H 2.CONNECT NO. 2 FUEL HOSE

Hide 17861 3.INSTALL INTAKE AIR CONNECTOR

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION