Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL PRESSURE PULSATION DAMPER
RM3250E _51 Engine / Hybrid System _038023 2TR-FE FUEL _0184675 FUEL PRESSURE PULSATION DAMPER A

2TR-FE FUEL  FUEL PRESSURE PULSATION DAMPER  INSTALLATION  


PROCEDURE

Hide 23270 1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

a.
A346791C01
0.76,0.802 0.917,0.802 0.917,0.802 1.729,1.135 true 0.563,0.708 0.76,0.896 0.198,0.188 10 false *1
*1 O-Ring


Apply a light coat of gasoline or spindle oil to the O-ring.


b.

Install the fuel pressure pulsation damper assembly with the 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


Hide 23271H 2.CONNECT NO. 1 FUEL HOSE

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION