Home › Engine / Hybrid System › 1GD-FTV ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM3250E _51 Engine / Hybrid System _037973 1GD-FTV ENGINE MECHANICAL _0184868 FRONT CRANKSHAFT OIL SEAL A

1GD-FTV ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 16400 1.REMOVE RADIATOR ASSEMBLY

Hide 88451B 2.REMOVE VISCOUS HEATER CRANKSHAFT PULLEY (w/ Viscous Heater)

a.
A346691

Remove the 4 bolts and viscous heater crankshaft pulley from the crankshaft pulley.


Hide 13496 3.REMOVE CRANKSHAFT PULLEY COVER

a.
A358218

w/ Viscous Heater:

Remove the crankshaft pulley cover from the crankshaft pulley.


b.
A343925

w/o Viscous Heater:

Remove the 4 bolts and crankshaft pulley cover from the crankshaft pulley.


Hide 13471 4.REMOVE CRANKSHAFT PULLEY

a.
A343926N01
1.167,1 0.583,1.333 0.583,1.333 0.417,1.333 true 2.917,0.833 2.75,0.833 2.75,0.833 2.271,1.167 true 0.125,1.24 0.5,1.438 0.375,0.198 10 false SST 2.958,0.729 3.333,0.927 0.375,0.198 10 false SST

Using SST, hold the crankshaft pulley and loosen the pulley bolt.

SST
09213-58014  (91551-80840)
09330-00021  

HINT:

Make sure to leave the pulley bolt screwed into the crankshaft by 2 or 3 threads.



b.
A343927N01
1.479,1.646 1.479,0.729 true 1.365,1.667 1.74,1.865 0.375,0.198 10 true SST

Using SST, remove the pulley bolt and crankshaft pulley from the crankshaft.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05021)


Hide 11303A 5.REMOVE FRONT CRANKSHAFT OIL SEAL

a.
A343928N01
1.813,0.76 1.24,0.448 1.24,0.448 1.083,0.448 true 0.792,0.354 1.25,0.552 0.458,0.198 10 false SST

Using SST, remove the front crankshaft oil seal from the timing chain cover assembly.

SST
09308-10010  
09950-40011  (09957-04010)
09950-60010  (09951-00350)

HINT:

After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.