Home › Engine / Hybrid System › 1GD-FTV ENGINE MECHANICAL › CYLINDER HEAD
RM3250E _51 Engine / Hybrid System _037973 1GD-FTV ENGINE MECHANICAL _0184872 CYLINDER HEAD A

1GD-FTV ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13716 1.REMOVE VALVE STEM CAP

a.

Remove the 16 valve stem caps from the cylinder head sub-assembly.

HINT:

Arrange the removed parts in the correct order.



Hide 13711 2.REMOVE INTAKE VALVE

a.
A337433N01
0.833,0.49 1.375,0.49 true 1.698,0.125 1.875,0.125 1.875,0.125 2.188,0.635 true 1.406,0.031 1.771,0.229 0.365,0.198 10 false SST 1.427,0.406 1.792,0.604 0.365,0.198 10 false SST

Using SST and wooden blocks, compress the valve compression spring and remove the valve spring retainer locks from the valve spring retainer.

SST
09202-70020  
09202-00021  


b.

Remove the valve spring retainer, valve compression spring and intake valve from the cylinder head sub-assembly.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 3.REMOVE EXHAUST VALVE

a.
A337434N01
2.031,0.271 2.635,0.271 true 0.646,0.396 0.896,0.135 0.896,0.135 1.073,0.135 true 1.74,0.177 2.125,0.365 0.385,0.188 10 false SST 1.125,0.052 1.51,0.24 0.385,0.188 10 false SST

Using SST and wooden blocks, compress the valve compression spring and remove the valve spring retainer locks from the valve spring retainer.

SST
09202-70020  
09202-00021  


b.

Remove the valve spring retainer, valve compression spring and exhaust valve from the cylinder head sub-assembly.

HINT:

Arrange the removed parts in the correct order.



Hide 13711E 4.REMOVE VALVE STEM OIL SEAL

a.
A337435

Using needle-nose pliers, remove the valve stem oil seals from the valve guide bush.


Hide 13734A 5.REMOVE VALVE SPRING SEAT

a.
A337436

Using compressed air and a magnet hand, remove the valve spring seat from the cylinder head sub-assembly by blowing air onto it.


Hide 11117E 6.REMOVE NO. 1 STRAIGHT SCREW PLUG WITH HEAD

a.
A337437

Using a 6 mm hexagon wrench, remove the 4 No. 1 straight screw plug with heads from the cylinder head sub-assembly.


Hide 7.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.