Home › Engine / Hybrid System › 2TR-FE LUBRICATION › ENGINE OIL COOLER
RM3250E _51 Engine / Hybrid System _038027 2TR-FE LUBRICATION _0185054 ENGINE OIL COOLER A

2TR-FE LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 15601 3.REMOVE OIL FILTER SUB-ASSEMBLY

Hide 15710 4.REMOVE OIL COOLER ASSEMBLY

a.
A346161

Slide the 2 clamps and disconnect the No. 4 water by-pass hose and No. 5 water by-pass hose from the oil cooler assembly.


b.
A346162

Remove the oil cooler union bolt, plate washer and oil cooler assembly.


c.

Remove the O-ring from the oil cooler assembly.