Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0185611 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 71512S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

a.
B378697C02
0.156,0.135 0.469,0.292 0.313,0.156 10 false *a
*a Component without harness connected
(Separate Type Front Seat Cushion Pad (Occupant Detection Sensor))


for Separate Seat Type:

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 10 kΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad (occupant detection sensor).


b.
B118219C04
0.198,0.167 0.51,0.323 0.313,0.156 10 false *a
*a Component without harness connected
(Separate Type Front Seat Cushion Pad (Occupant Detection Sensor))


for Bench Seat Type:

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Front passenger seat occupied Below 100 Ω
1 - 2 Front passenger seat not occupied 10 kΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad (occupant detection sensor).