Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0185612 FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

a.
B276073C03
0.044,0.0 0.299,0.255 0.255,0.255 10 *a
*a Component without harness connected
(Front Seat Inner Belt Assembly LH)


for Driver Side:

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Seat belt unfastened Below 1 Ω
2 - 3 Seat belt fastened 10 MΩ or higher


If the result is not as specified, replace the front seat inner belt assembly LH.


b.

for Front Passenger Side:

Measure the resistance according to the value(s) in the table below.

B405991C01
2.563,0.906 2.979,1.323 true 2.354,0.906 1.854,1.313 true 2.271,0.125 2.583,0.281 0.313,0.156 10 false *a 4.406,0.208 4.719,0.365 0.313,0.156 10 false *b 0.073,0.063 0.385,0.219 0.313,0.156 10 false *c 3.063,1.313 3.219,1.469 0.156,0.156 10 false E 1.677,1.302 1.833,1.5 0.156,0.198 10 false +
*a Connector A *b Connector B
*c Component without harness connected
(Front Seat Inner Belt Assembly RH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition
A-2(E) - B-3 Seat belt unfastened Below 1 Ω
A-2(E) - B-3 Seat belt fastened 10 kΩ or higher
A-3 (+) - B-1 Always Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly RH.


Hide 73230 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY RH

a.

for Front Passenger Side:

Measure the resistance according to the value(s) in the table below.

B405991C01
2.563,0.906 2.979,1.323 true 2.354,0.906 1.854,1.313 true 2.271,0.125 2.583,0.281 0.313,0.156 10 false *a 4.406,0.208 4.719,0.365 0.313,0.156 10 false *b 0.073,0.063 0.385,0.219 0.313,0.156 10 false *c 3.063,1.313 3.219,1.469 0.156,0.156 10 false E 1.677,1.302 1.833,1.5 0.156,0.198 10 false +
*a Connector A *b Connector B
*c Component without harness connected
(Front Seat Inner Belt Assembly RH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition
A-2(E) - B-3 Seat belt unfastened Below 1 Ω
A-2(E) - B-3 Seat belt fastened 10 kΩ or higher
A-3 (+) - B-1 Always Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly RH.


b.
B276073C03
0.044,0.0 0.299,0.255 0.255,0.255 10 *a
*a Component without harness connected
(Front Seat Inner Belt Assembly LH)


for Driver Side:

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Seat belt unfastened Below 1 Ω
2 - 3 Seat belt fastened 10 MΩ or higher


If the result is not as specified, replace the front seat inner belt assembly LH.