Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0185612 FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.



PROCEDURE

Hide 73230 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

a.

Install the front seat belt anchor plate.


b.
B416251C01
2.635,1.448 3.052,1.74 true 3.094,1.729 3.406,1.885 0.313,0.156 10 false *a
*a Protruding Part


Install the front seat inner belt assembly LH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.



c.

Attach the wire harness clamp.


d.
B405988C01
0,0 0,0 false
V113147

Install in this Direction


Close the cover as shown in the illustration.


e.
B416240

Attach the wire harness clamp and connector clamp.


f.
B415671

Install the band in the position shown in the illustration.


Hide 73240 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

a.

Install the front seat belt anchor plate.


b.
B416250C01
0.656,1.615 0.396,1.781 true 0.208,1.719 0.521,1.875 0.313,0.156 10 true *a
*a Protruding Part


Install the front seat inner belt assembly RH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.



c.

Attach the wire harness clamp.


d.
B405989C02
0,0 0,0 false
V113147

Install in this Direction


Close the cover as shown in the illustration.


e.
B415672

Attach the wire harness clamp and connector clamp.