Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Bench Seat Type)
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0185614 FRONT SEAT INNER BELT ASSEMBLY(for Bench Seat Type) A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Bench Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.



PROCEDURE

Hide 73150 1.INSTALL FRONT CENTER SEAT LAP TYPE BELT ASSEMBLY (for 2 Person Bench Seat Type)

B415685

a.

Install the front center seat lap type belt assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73230 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

a.
B415686C01
1.115,0.594 1.448,0.854 true 0.906,0.469 1.115,0.667 0.208,0.198 10 true *a
*a Mark
V100136

Front
V100155

Protruding Part


for 2 Person Bench Seat Type:

i.

Align the direction of the anchor plate with the protruding part of the vehicle body as shown in the illustration.


ii.

Install the front seat inner belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the body.




b.
B415687C01
0,0 0,0 false
V100136

Front
V100155

Protruding Part


except 2 Person Bench Seat Type:

i.

Align the direction of the anchor plate with the protruding part of the vehicle body as shown in the illustration.


ii.

Install the front seat inner belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the body.