Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab)
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0185616 FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab) G

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY(for Single Cab)  INSPECTION  


PROCEDURE

Hide 73220 1.INSPECT FRONT SEAT OUTER BELT ASSEMBLY

a.
B404824C03
1.906,0.135 2.219,0.292 0.313,0.156 10 false *a 0.458,0.854 0.771,1.01 0.313,0.156 10 false *b 1.167,0.302 1.479,0.458 0.313,0.156 10 false *c 0.083,0.094 0.396,0.292 0.313,0.198 10 false *A
*A w/ Pretensioner
*a Unlocked
*b Locked
*c 45°


B415714C01
0.083,0.083 0.396,0.24 0.313,0.156 10 false *A 2.125,0.042 2.438,0.198 0.313,0.156 10 false *a 0.365,0.844 0.677,1 0.313,0.156 10 false *b 1.229,0.365 1.542,0.521 0.313,0.156 10 false *c
*A w/o Pretensioner
*a Unlocked
*b Locked
*c 45°


Before installing the front seat outer belt assembly, check the ELR.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the front seat outer belt assembly.