Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM3250E _58 Vehicle Interior _038071 SEAT _0185771 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

If the front seat side airbag was deployed, replace the front seat airbag assembly, separate type front seatback frame sub-assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 72526E 1.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

a.
B402747

Remove the screw and reclining adjuster release handle LH.


Hide 71812D 2.REMOVE FRONT SEAT CUSHION SHIELD LH

B416260C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


a.

Lift up removal direction (1) shown in the illustration to detach the guide.


b.

Pull out removal direction (2) shown in the illustration to detach the claw and remove the front seat cushion shield LH.


Hide 71862 3.REMOVE FRONT SEAT INNER CUSHION SHIELD LH

a.
B402749C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Lift in removal direction (1) shown in the illustration.


b.

Detach the claw.


c.

Pull out removal direction (2) shown in the illustration to remove the front seat cushion shield LH.


Hide 4.REMOVE SEATBACK COVER WITH PAD

a.
B402750

Remove the 4 bolts and front seatback assembly.


b.
B402751

While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.


c.
B402752C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull out the rear end of the seatback cover with pad in removal direction (1) shown in the illustration.


d.

Lift up removal direction (2) shown in the illustration to remove the seatback cover with pad.


Hide 71074S 5.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B402753

Remove the 4 hog rings and separate type front seatback cover.


Hide 6.REMOVE SEAT COVER WIRE

a.
B402754

Remove the seat cover wire.


Hide 7.REMOVE SEAT CUSHION COVER WITH PAD

a.

Disconnect the connector.


b.

Detach the connector clamp.


c.
B402755

Disconnect the 2 straps of the separate type front seat cushion cover from the front seat cushion frame sub-assembly LH.


d.

While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook and remove the seat cushion cover with pad.


e.
B402756C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull out the rear end of the seat cushion cover with pad in removal direction (1) shown in the illustration.


f.

Lift up removal direction (2) shown in the illustration to remove the seat cushion cover with pad.


Hide 71072S 8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B402757

Remove the 7 hog rings and separate type front seat cushion cover.


Hide 9.REMOVE SEAT COVER WIRE

a.
B402758

Remove the seat cover wire.