Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type)
RM3250E _58 Vehicle Interior _038071 SEAT _0185772 REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type) A

SEAT  REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.REMOVE REAR SEAT ASSEMBLY

a.
B407396C01
1.396,1.5 1.813,1.083 true 1.229,1.49 1.542,1.646 0.313,0.156 10 false *1
*1 Protective Tape
V113147

Remove in this Direction


w/ Center Headrest:

Using a screwdriver, push the buckle button to release the lock and disconnect the rear seat center outer belt.

HINT:

Tape the screwdriver tip before use.



b.
B394840

Pull the 2 No. 1 fold seat stopper band assemblies to release the 2 seat cushion locks.


c.

Fold up the 2 rear seat cushion assemblies.


d.

Attach the 2 No. 1 fold seat stopper band assemblies to the stay of the rear seat headrest assembly and temporarily fix the 2 rear seat cushion assemblies in place.


e.
B410489C01
0,0 0,0 false
V113147

Remove in this Direction


w/o Center Headrest:

Disconnect the 3 inner belt buckles from the seatback.


f.
B407397C01
0,0 0,0 false
V113147

Remove in this Direction


w/ Center Headrest:

Disconnect the 4 inner belt buckles from the seatback.


g.
B394841C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 5 bolts.


h.

Pull in the direction shown in the illustration to detach the hook and remove the rear seat assembly.

NOTICE:
·

Removing the rear seat assembly from the vehicle must be performed by multiple people.

·

Do not damage the rear seat assembly, body exterior or vehicle interior.




Hide 71397B 2.REMOVE REAR SEATBACK HOLDER RH

NOTICE:
·

Perform the following only when replacing the rear seatback holder RH.

·

Do not reuse the rear seatback holder RH after removing it.



B407398C01
0.396,1.063 0.854,1.292 true 0.906,1.302 1.219,1.458 0.313,0.156 10 true *1
*1 Protective Tape
V113147

Remove in this Direction


a.

Using a screwdriver, detach the claw and remove the 2 rear seatback holder RH.

HINT:

Tape the screwdriver tip before use.