Wear protective gloves. Sharp areas on the parts may injure your hands.
71940A
1.REMOVE REAR SEAT HEADREST ASSEMBLY
Detach the 2 No. 1 fold seat stopper band assemblies from the stay of the rear seat headrest assembly.
Remove the 2 rear seat headrest assemblies.
71960B
2.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)
Remove the rear seat center headrest assembly.
72830
3.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY
|
Remove in this Direction |
Remove the 2 nuts.
Detach the guide and remove the rear seat center armrest assembly.
72835
4.REMOVE REAR SEAT ARMREST ARM RH
Remove the bolt, bush and rear seat armrest arm RH.
72836B
5.REMOVE REAR SEAT ARMREST ARM LH
Use the same procedure described for the RH side.
72806B
6.REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY
|
Remove in this Direction |
Using moulding remover A, detach the claw and pull up as shown in the illustration.
|
Remove in this Direction |
Pull up as shown in the illustration to detach the guide and remove the rear seat center armrest cup holder sub-assembly.
71931B
7.REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
|
Remove in this Direction |
w/o Center Headrest:
Detach the claw and remove the 4 rear No. 1 seat headrest support assemblies.
|
Remove in this Direction |
w/ Center Headrest:
Detach the claw and remove the 6 rear No. 1 seat headrest support assemblies.
8.REMOVE REAR SEATBACK COVER WITH PAD
Detach the hooks.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Pull out the rear end of the rear seatback cover with pad in remove in this direction (1) shown in the illustration.
Lift up in remove in this direction (2) shown in the illustration to remove the rear seatback cover with pad.
79013A
9.REMOVE NO. 1 SEATBACK COVER SUB-ASSEMBLY
Remove the 12 hog rings and No. 1 seatback cover sub-assembly from the No. 1 seatback pad.
10.REMOVE SEAT COVER WIRE
Remove the seat cover wire.
11.REMOVE REAR SEAT CUSHION COVER WITH PAD RH
Detach the hook.
Pull out the 2 fasteners.
Open the 2 fasteners.
Pass the No. 1 fold seat stopper band assembly through the hole of the No. 1 seat cushion cover sub-assembly RH.
|
Remove in this Direction |
Remove the rear seat cushion cover with pad RH from the No. 1 seat cushion frame sub-assembly RH.
79011
12.REMOVE NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY RH
Remove the 12 hog rings and No. 1 seat cushion cover sub-assembly RH from the No. 1 seat cushion pad RH.
13.REMOVE SEAT COVER WIRE
Remove the seat cover wire.
14.REMOVE REAR SEAT CUSHION COVER WITH PAD LH
Detach the hook.
Pull out the 2 fasteners.
Open the 2 fasteners.
Pass the No. 1 fold seat stopper band assembly through the hole of the No. 1 seat cushion cover sub-assembly LH.
|
Remove in this Direction |
Remove the rear seat cushion cover with pad LH from the No. 1 seat cushion frame sub-assembly LH.
79012
15.REMOVE NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY LH
Remove the 12 hog rings and No. 1 seat cushion cover sub-assembly LH from the No. 1 seat cushion pad LH.
16.REMOVE SEAT COVER WIRE
Remove the seat cover wire.
72995
17.REMOVE REAR SEAT CUSHION COVER RH
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Pull in removal direction (1) shown in the illustration to detach the claw.
Pull in removal direction (2) shown in the illustration to detach the guide and remove the rear seat cushion cover RH.
72998B
18.REMOVE REAR SEAT CUSHION COVER LH
Use the same procedure described for the RH side.
71223
19.REMOVE REAR SEAT CUSHION SIDE BRACKET RH
Remove the 2 bolts, bush and rear seat cushion side bracket RH.
71223
20.REMOVE REAR SEAT CUSHION SIDE BRACKET LH
Use the same procedure described for the RH side.
79101B
21.REMOVE NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY RH
Remove the nut and No. 1 seat cushion frame sub-assembly RH together with the No. 1 seatback hinge sub-assembly RH.
79102
22.REMOVE NO. 1 SEAT CUSHION FRAME SUB-ASSEMBLY LH
Remove the nut and No. 1 seat cushion frame sub-assembly LH together with the No. 1 seatback hinge sub-assembly LH.
72995B
23.REMOVE NO. 1 SEAT CUSHION COVER RH
|
Remove in this Direction |
Detach the claw and remove the No. 1 seat cushion cover RH.
72998A
24.REMOVE NO. 1 SEAT CUSHION COVER LH
Use the same procedure described for the RH side.
71303C
25.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH
Remove the bolt.
Detach the guide and remove the rear seatback hinge sub-assembly RH.
71304C
26.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH
Use the same procedure described for the RH side.
72630F
27.REMOVE REAR NO. 2 SEAT LOCK ASSEMBLY
Use the same procedure for the opposite side.
Remove the 2 bolts and rear No. 2 seat lock assembly together with the No. 1 fold seat stopper band assembly.
78950
28.REMOVE NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY
Use the same procedure for the opposite side.
Remove the No. 1 fold seat stopper band assembly from the rear No. 2 seat lock assembly.
71485C
29.REMOVE REAR SEAT HINGE COVER RH
Perform the following only when replacing the rear seat hinge cover RH.
Do not reuse the rear seat hinge cover RH after removing it.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Pull in removal direction (1) shown in the illustration to detach the claw.
Pull in removal direction (2) shown in the illustration to detach the guide and remove the rear seat hinge cover RH.
71486C
30.REMOVE REAR SEAT HINGE COVER LH
Perform the following only when replacing the rear seat hinge cover LH.
Do not reuse the rear seat hinge cover LH after removing it.
Use the same procedure described for the RH side.