Home › Vehicle Interior › SEAT › SEAT HEATER SWITCH
RM3250E _58 Vehicle Interior _038071 SEAT _0185775 SEAT HEATER SWITCH G

SEAT  SEAT HEATER SWITCH  INSPECTION  


PROCEDURE

Hide 84751 1.INSPECT SEAT HEATER SWITCH

a.
C327537C02
1.792,1.896 1.792,1.292 true 2.135,1.948 1.958,1.302 true 1.646,1.156 1.646,0.552 true 1.479,1.167 1.146,0.583 true 0.135,0.094 0.448,0.292 0.313,0.198 10 false *a 1.76,1.948 2.083,2.146 0.323,0.198 10 false IG 2.115,1.948 2.438,2.146 0.323,0.198 10 false RH 1.583,0.365 1.906,0.563 0.323,0.198 10 false IG 1,0.375 1.323,0.573 0.323,0.198 10 false LH
*a Component without harness connected
(Seat Heater Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance (LH Seat):
Tester Connection Switch Condition Specified Condition
5 (IG) - 6 (LH) LOCK Below 1 Ω
FREE 10 kΩ or higher


Standard Resistance (RH Seat):
Tester Connection Switch Condition Specified Condition
4 (IG) - 3 (RH) LOCK Below 1 Ω
FREE 10 kΩ or higher


If the result is not as specified, replace the seat heater switch.