Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER
RM3250E _58 Vehicle Interior _038071 SEAT _0185777 FRONT SEAT CUSHION HEATER G

SEAT  FRONT SEAT CUSHION HEATER  INSPECTION  


PROCEDURE

Hide 71071S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER (for Manual Seat)

a.

Check the separate type front seat cushion cover (front seat cushion heater).

i.
B414993C01
0.115,0.073 0.427,0.271 0.313,0.198 10 false *a 0.375,0.083 0.688,0.281 0.313,0.198 10 false *1 2.25,0.531 2.563,0.729 0.313,0.198 10 false *2
*1 Connector A
*2 Connector B
*a Component without harness connected
(Separate Type Front Seat Cushion Cover (Front Seat Cushion Heater))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-5 - B-1 Seat cushion heater
temperature 20°C (68°F)
6.11 to 7.46 Ω
A-6 - B-2
A-5 - A-6
B-1 - B-2


HINT:

If the result is not as specified, replace the separate type front seat cushion cover (front seat cushion heater).




Hide 71072S 2.INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER (for Power Seat Type LH Side)

a.

Check the separate type front seat cushion cover (front seat cushion heater).

i.
B414994C01
0.135,0.125 0.448,0.323 0.313,0.198 10 false *a 0.469,0.594 0.781,0.792 0.313,0.198 10 false *1 1.875,0.604 2.188,0.802 0.313,0.198 10 false *2
*1 Connector A
*2 Connector B
*a Component without harness connected
(Separate Type Front Seat Cushion Cover (Front Seat Cushion Heater))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1 - A-2 Seat cushion heater
temperature 20°C (68°F)
6.11 to 7.46 Ω
A-2 - B-1
A-2 - B-2
B-1 - B-2


HINT:

If the result is not as specified, replace the separate type front seat cushion cover (front seat cushion heater).




Hide 71072S 3.INSPECT SEPARATE TYPE FRONT SEAT CUSHION COVER (for Power Seat Type RH Side)

a.

Check the separate type front seat cushion cover (front seat cushion heater).

i.
B414993C01
0.115,0.073 0.427,0.271 0.313,0.198 10 false *a 0.375,0.083 0.688,0.281 0.313,0.198 10 false *1 2.25,0.531 2.563,0.729 0.313,0.198 10 false *2
*1 Connector A
*2 Connector B
*a Component without harness connected
(Separate Type Front Seat Cushion Cover (Front Seat Cushion Heater))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-5 - B-1 Seat cushion heater
temperature 20°C (68°F)
6.11 to 7.46 Ω
A-6 - B-2
A-5 - A-6
B-1 - B-2


HINT:

If the result is not as specified, replace the separate type front seat cushion cover (front seat cushion heater).