Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Resin Type Bumper)
RM3250E _59 Vehicle Exterior _038076 WIPER / WASHER _0185802 WASHER MOTOR(for Resin Type Bumper) A

WIPER / WASHER  WASHER MOTOR(for Resin Type Bumper)  INSTALLATION  


PROCEDURE

Hide 85330 1.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.

for 2.5 L Washer Jar:

i.
B400412E01
2.979,0.479 3.135,0.677 0.156,0.198 10 true 1 0.948,0.333 1.104,0.531 0.156,0.198 10 true 2 0.333,3.302 0.49,3.5 0.156,0.198 10 true 3

Install the windshield washer jar assembly with the 3 bolts in the order indicated in the illustration.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


ii.

Attach the clamp.



b.

for 4.5 L Washer Jar, w/ Headlight Cleaner System:

i.
B407731C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the headlight cleaner control relay.


ii.
B407729C01
0,0 0,0 false
V113147

Install in this Direction


Install the headlight cleaner motor and pump assembly.


iii.
B407727C01
0,0 0,0 false
V113147

Install in this Direction


Install the level warning switch assembly.


iv.
B407723C01
3.156,0.094 3.313,0.292 0.156,0.198 10 true 1 1.906,0.094 2.063,0.292 0.156,0.198 10 true 2 0.74,3.521 0.927,3.76 0.188,0.24 10 true 3
V100135

Bolt
V100136

Connector


Install the windshield washer jar assembly with the 3 bolts in the order indicated in the illustration.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


v.

Attach the clamp.


vi.

Connect the 3 connectors.


vii.
B407721C01
0,0 0,0 false
V113147

Connect in this Direction


Attach the claw to connect the headlight washer hose.



c.

for 4.5 L Washer Jar, w/o Headlight Cleaner System:

i.
B407727C01
0,0 0,0 false
V113147

Install in this Direction


Install the level warning switch assembly.


ii.
B407725C01
3.167,0.104 3.323,0.302 0.156,0.198 10 true 1 1.885,0.125 2.042,0.323 0.156,0.198 10 true 2 0.74,3.542 0.938,3.76 0.198,0.219 10 true 3
V100135

Bolt
V100136

Connector


Install the windshield washer jar assembly with the 3 bolts in the order indicated in the illustration.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


iii.

Attach the clamp.


iv.

Connect the connector.



Hide 85301 2.INSTALL WASHER INLET SUB-ASSEMBLY

a.
B400411C01
0,0 0,0 false
V113147

Install in this Direction


Install the washer inlet sub-assembly to the windshield washer jar assembly.


b.

Attach the claw and guide.


Hide 85310 3.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.

for 2.5 L Washer Jar:

i.
B400409C01
0,0 0,0 false
V113147

Install in this Direction


Install the windshield washer motor and pump assembly.


ii.

Connect the connector.



b.

for 4.5 L Washer Jar:

i.
B407719C01
0,0 0,0 false
V113147

Install in this Direction


Install the windshield washer motor and pump assembly.


ii.

Connect the connector.



Hide 4.FILL UP WINDSHIELD WASHER JAR WITH WASHER FLUID

a.

for 2.5 L Washer Jar:

i.
B400407

Connect the washer hose.



b.

for 4.5 L Washer Jar:

i.
B407717

Connect the washer hose.



c.

Refill the windshield washer fluid.


d.

for 2WD Model:

i.
B400405C01
0,0 0,0 false
V100135

Clip
V100136

Screw
V113147

Return in this Direction


Return the front fender liner LH to its original position as shown in the illustration.


ii.

Install the 9 clips.


iii.

Install the 3 screws.



e.

for 4WD Model, for Prerunner Model:

i.
B400511C01
0,0 0,0 false
V100135

Clip
V100136

Screw
V113147

Return in this Direction


Return the front fender liner LH to its original position as shown in the illustration.


ii.

Install the 11 clips.


iii.

Install the 3 screws.



f.
B400510C01
1.063,2.042 1.375,2.198 0.313,0.156 10 false *a 1.917,2.063 2.229,2.219 0.313,0.156 10 false *b
*a Correct
*b Incorrect


Install the pin hold clip as shown in the illustration.