Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Resin Type Bumper)
RM3250E _59 Vehicle Exterior _038076 WIPER / WASHER _0185802 WASHER MOTOR(for Resin Type Bumper) G

WIPER / WASHER  WASHER MOTOR(for Resin Type Bumper)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

HINT:

This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


a.

With the windshield washer motor and pump assembly installed to the windshield washer jar assembly, pour windshield washer fluid into the windshield washer jar assembly.


b.
B400512C01
0.458,0.229 0.771,0.385 0.313,0.156 10 false *a
*a Component without harness connected (Windshield Washer Motor and Pump Assembly)


Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Washer fluid is pumped


If the result is not as specified, replace the windshield washer motor and pump assembly.