Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER CONTROL RELAY
RM3250E _59 Vehicle Exterior _038076 WIPER / WASHER _0185814 HEADLIGHT CLEANER CONTROL RELAY A

WIPER / WASHER  HEADLIGHT CLEANER CONTROL RELAY  REMOVAL  


PROCEDURE

Hide 85942 1.REMOVE HEADLIGHT CLEANER CONTROL RELAY

a.
B400509C01
1.74,2.104 2,2.375 0.26,0.271 10 false 90°
V100135

Turn in this Direction


Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.


b.
B400445C01
0,0 0,0 false
V100135

Screw
V100136

Clip
V113147

Slide in this Direction


Remove the 3 screws.


c.

Remove the 11 clips.


d.

Slide the front fender liner LH toward the rear of the vehicle and down to create a clearance as shown in the illustration.


e.
B407749C01
0,0 0,0 false
V113147

Remove in this Direction


Disconnect the connector.


f.

Detach the claw and remove the headlight cleaner control relay as shown in the illustration.