Home › Vehicle Interior › HEATING / AIR CONDITIONING › REFRIGERANT LINE
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0185860 REFRIGERANT LINE L

HEATING / AIR CONDITIONING  REFRIGERANT LINE  PRECAUTION  


PRECAUTION FOR O-RINGS, PIPES AND OTHER INSTALLATION PARTS


a.

Check the O-ring.

i.

Check that it is free from cracks, dents, foreign matter and twisting.

E319074C01
0.167,0.583 0.479,0.74 0.313,0.156 10 false *a 1.938,0.573 2.25,0.729 0.313,0.156 10 false *b 3.698,0.573 4.01,0.729 0.313,0.156 10 false *c 5.458,0.573 5.771,0.729 0.313,0.156 10 false *d
*a Cracks *b Dents
*c Foreign Matter Adhesion *d Twisting


HINT:

Use a new O-ring.




b.

Check the pipe.

i.

Check that the pipe is not damaged.


ii.

Check that there is no foreign matter.


iii.

Check that the pipe is not corroded.

E319073C01
0.542,0.281 0.854,0.438 0.313,0.156 10 false *a 2.667,0.281 2.979,0.438 0.313,0.156 10 false *b 4.823,0.271 5.135,0.427 0.313,0.156 10 false *c
*a Damage *b Foreign Matter Adhesion
*c Corrosion - -


HINT:

If the pipe is damaged or corroded, replace it with a new one.




c.

Check other installation parts.

i.

Check that other installation parts are not damaged.


ii.

Check that there is no foreign matter.


iii.

Check that other installation parts are not corroded.

E319481C01
0.542,0.281 0.854,0.438 0.313,0.156 10 false *a 2.698,0.302 3.01,0.458 0.313,0.156 10 false *b 4.833,0.292 5.146,0.448 0.313,0.156 10 false *c
*a Damage *b Foreign Matter Adhesion
*c Corrosion - -


HINT:

If the installation part is damaged or corroded, replace it with a new one.




d.

O-ring installation.

i.

Use a new O-ring.


ii.

Apply a sufficient amount of compressor oil (ND-OIL8) to the O-ring.


iii.

Do not use cotton gloves. Lint or other foreign matter from the gloves may stick to the O-rings and cause a refrigerant gas leak.


iv.

After installing the O-ring, check that it is free from cracks, dents, foreign matter and twisting.

E319074C01
0.167,0.583 0.479,0.74 0.313,0.156 10 false *a 1.938,0.573 2.25,0.729 0.313,0.156 10 false *b 3.698,0.573 4.01,0.729 0.313,0.156 10 false *c 5.458,0.573 5.771,0.729 0.313,0.156 10 false *d
*a Cracks *b Dents
*c Foreign Matter Adhesion *d Twisting