1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
12601E
2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)
16361A
3.REMOVE FAN AND GENERATOR V BELT
for 1KD-FTV:
Click hereEngine / Hybrid System>1KD-FTV ENGINE MECHANICAL>DRIVE BELT>REMOVAL
for 2KD-FTV:
Click hereEngine / Hybrid System>2KD-FTV ENGINE MECHANICAL>DRIVE BELT>REMOVAL
88711
4.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
| *A | w/o Thermostat |
| *B | w/ Thermostat |
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88704
5.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
| *A | w/o Thermostat |
| *B | w/ Thermostat |
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
6.REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH
| *A | w/o Thermostat |
| *B | w/ Thermostat |
Disconnect the connector.
Detach the clamp.
| *A | w/o Thermostat |
| *B | w/ Thermostat |
Remove the 4 bolts compressor assembly with magnet clutch.