Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1GD-FTV, 2GD-FTV)
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0185865 COMPRESSOR(for 1GD-FTV, 2GD-FTV) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GD-FTV, 2GD-FTV)  REMOVAL  


PROCEDURE

Hide 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 16361A 2.REMOVE FAN AND GENERATOR V BELT

Hide 4.REMOVE FRONT WHEEL LH

Hide 53737B 5.REMOVE FRONT FENDER APRON SEAL LH

a.

for 4WD, for Pre-Runner:

Remove the 6 clips and front fender apron seal LH.


b.

for 2WD:

Remove the 5 clips and front fender apron seal LH.


Hide 88711 6.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
E320639C01
0.052,0.063 0.365,0.219 0.313,0.156 10 true *A 0.052,2.448 0.365,2.604 0.313,0.156 10 true *B
*A w/o Thermostat
*B w/ Thermostat


Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.


b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88704 7.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E320640C01
0.052,0.031 0.365,0.188 0.313,0.156 10 true *A 0.083,2.438 0.396,2.594 0.313,0.156 10 true *B
*A w/o Thermostat
*B w/ Thermostat


Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.


b.

Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 8.REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH

a.
E320641C01
0.052,0.052 0.365,0.208 0.313,0.156 10 true *A 0.083,2.427 0.396,2.583 0.313,0.156 10 true *B
*A w/o Thermostat
*B w/ Thermostat


Disconnect the connector.


b.

Detach the clamp.


c.
E320642C01
0.042,0.042 0.354,0.198 0.313,0.156 10 true *A 0.083,2.458 0.396,2.615 0.313,0.156 10 true *B
*A w/o Thermostat
*B w/ Thermostat
V100135

Bolt
V100136

Nut


Remove the 2 bolts and 2 nuts.


d.
E320643C01
0.063,0.052 0.375,0.208 0.313,0.156 10 true *A 0.052,2.469 0.365,2.625 0.313,0.156 10 true *B
*A w/o Thermostat
*B w/ Thermostat


Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with magnet clutch.

HINT:

Remove the compressor assembly with magnet clutch from the vehicle with the stud bolt remaining in the compressor assembly with magnet clutch.