Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR
RM3250E _54 Brake _038044 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0186159 REAR SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.REMOVE REAR SPEED SENSOR (for 2WD)

a.

for LH:

C323034

i.

Disconnect the connector.


ii.

Detach the clamp.


iii.

Remove the 2 bolts and 2 harness clamps.


iv.

Remove the bolt and rear speed sensor LH.



b.

for RH:

C323035

i.

Disconnect the connector and detach the clamp.


ii.

Detach the 2 clamps.


iii.

Remove the bolt and harness clamp.


iv.

Remove the bolt and rear speed sensor RH.



Hide 3.REMOVE REAR SPEED SENSOR (for 4WD and Pre-Runner)

a.

for LH:

C323037

i.

Disconnect the connector.


ii.

Detach the 2 clamps.


iii.

Remove the 2 bolts and 2 harness clamps.


iv.

Remove the bolt and rear speed sensor LH.



b.

for RH:

C323038

i.

Disconnect the connector and detach the clamp.


ii.

Detach the 2 clamps.


iii.

Remove the bolt and harness clamp.


iv.

Remove the bolt and rear speed sensor RH.